Table of Contents
Advertisement
1. If installed, release the cable management arm .
2. If the server is using a single power supply only, remove all power from the server:
a. Back up all server data.
b. Power down the server.
c. Disconnect all peripheral cables from the server.
3. Slide the power supply out of the bay.
4. Release the ground (earthed), -48 V, and return wires from the strain relief strap.
5. Disconnect the ground (earthed) wire from the power supply.
6. Remove the clear plastic cover from the power supply.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide
57
Advertisement
Table of Contents
