HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 147

Item Item LED LED
Fan bay numbering Fan bay numbering
The arrow points to the front of the server.
Cabling Cabling
HPE ProLiant Gen10 Plus DL HPE ProLiant Gen10 Plus
When installing cables, observe the following:
All ports are labeled:
System board ports
Controller ports
12G SAS Expander ports
Most data cables have labels near each connector with destination port information.
Some data cables are pre-bent. Do not unbend or manipulate the cables.
Before connecting a cable to a port, lay the cable in place to verify the length of the cable.
When routing cables from the front to the rear of the server, use the cable channels on either side of the chassis.
Cabling diagrams Cabling diagrams
Use the following tables to find cabling information and diagrams. For additional cabling configurations, see
https://www.hpe.com/info/proliantcablingmatrix. https://www.hpe.com/info/proliantcablingmatrix
Status Status Description Description
Solid green System is up and fully operational
DL Servers Storage Cabling Guidelines Servers Storage Cabling Guidelines
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 147