HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 59

To replace the component, reverse the removal procedure.
Removing and replacing the rack rails Removing and replacing the rack rails
WARNING: WARNING:
To reduce the risk of personal injury or damage to the equipment, you must adequately support the enclosure during
installation and removal.
Prerequisites Prerequisites
Before you begin, be sure that you have the appropriate screwdriver for the screws in the rack.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack .
4. Place the server on a sturdy, level surface.
IMPORTANT: IMPORTANT:
When removing the rail from the rack, always remove the front of the rail first.
5. Remove the rail from the rack.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 59