HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 111

15. Remove a DIMM.
16. Remove the fan cage.
17. Disconnect all cables connected to the system board.
18. Loosen the system board thumbscrews.
19. Remove the system board.
Replacing the system board Replacing the system board
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 screwdriver (for system board screws)
T-20 screwdriver for processor and heatsink screws
Alcohol wipe
Thermal grease (spare part number 777298-001)
Procedure Procedure
1. Install the spare system board.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 111