HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 130

Systems Insight Display Systems Insight Display
LED and color LED and color
Power supply (amber)
Power cap (off)
Power cap (green)
Power cap (green)
Power cap (flashing
amber)
IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of IMPORTANT:
DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a known working
DIMM.
Rear panel components Rear panel components
Item Item Description Description
1 Primary riser slots 1–3 (optional drive cage)
2 Optional secondary riser slots 4–6 (optional drive cage)
3 Serial port (optional)
4 Optional tertiary riser slots 7–8 (optional drive cage)
5 Power supply 1
6 Power supply 2
7 Video port
8 OCP NIC 3.0 slot
Health Health System System Status Status
LED LED power LED power LED
Amber Green One or more of the following
conditions might exist:
— Amber Standby.
— Flashing Waiting for power.
green
— Green Power is available.
— Amber Power is not available.
1
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide
Redundant power supply is
installed and only one power
supply is functional.
AC power cord is not plugged
into redundant power supply.
Redundant power supply fault.
Power supply mismatch at
POST or power supply
mismatch through hot-plug
addition.
130