HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 116

product ID located on the chassis.
7. Type the product ID, and then press Enter
8. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Date and Time.
9. Configure the date and time settings:
Date (mm-dd-yyyy)—Enter the date in a month-day-year (mm-dd-yyyy) format.
Time (hh:mm:ss)—Enter the time in a 24-hour format (hh:mm:ss) format.
Hour Format—Select either a 12- or 24-hours format. (This menu is supported in Gen10 Plus and later servers.)
Time Format
Coordinated Universal Time (UTC) —Calculates the time stored in the hardware real-time clock (RTC) from the associated
Time Zone setting.
Local Time—Removes the use of the Time Zone setting. This option is useful for addressing interaction issues in Windows
operating systems set in legacy BIOS boot mode.
Time Zone—Select the time zone for the system.
Daylight Savings Time—Select whether to enable DST in the system time setting.
10. To confirm and save the settings, press F12
The server automatically reboots.
The installation is complete.
HPE Trusted Platform Module 2.0 Gen10 Plus option HPE Trusted Platform Module 2.0 Gen10 Plus option
The option is not a customer-removable part.
CAUTION: If the TPM is removed from the original server and powered up on a different server, data stored in the TPM CAUTION:
including keys will be erased.
If you suspect a TPM board failure, leave the TPM installed and remove the system board ( system board). Contact a Hewlett Packard
Enterprise authorized service provider for a replacement system board and TPM module.
Troubleshooting Troubleshooting
Troubleshooting resources Troubleshooting resources
Troubleshooting resources are available for HPE Gen10 and Gen10 Plus server products in the following documents:
Troubleshooting Guide for HPE ProLiant Gen10 and Gen10 Plus servers provides procedures for resolving common problems and
comprehensive courses of action for fault isolation and identification, issue resolution, and software maintenance.
Integrated Management Log Messages and Troubleshooting Guide for HPE ProLiant Gen10 and Gen10 Plus servers and HPE
Synergy provides IML messages and associated troubleshooting information to resolve critical and cautionary IML events.
To access troubleshooting resources for your product, see the Hewlett Packard Enterprise website
Enter.
F12.
Hewlett Packard Enterprise website .
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 116