HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 62

1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect any external cables that are connected to the expansion board.
4. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
5. Remove the access panel .
6. Disconnect any internal cables that are connected to the expansion board.
7. Remove the expansion board .
8. Remove the PCIe riser cage.
To replace the component, reverse the removal procedure.
Removing and replacing the secondary and tertiary PCIe riser cages Removing and replacing the secondary and tertiary PCIe riser cages
CAUTION: To prevent improper cooling or thermal damage, the server PCI slots must have an expansion slot blank or CAUTION:
an expansion board installed.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 62