HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 47

Release the full-length expansion board retainer Release the full-length expansion board retainer
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle .
6. Release the full-length expansion board retainer.
To replace the component, reverse the removal procedure.
Releasing the cable management arm Releasing the cable management arm
Release the cable management arm and then swing the arm away from the rack.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 47