HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 133

Item Item Description Description
23 Chassis Intrusion Detection connector
24 Dual USB port
25 Flexible Smart Array connector
26 Tertiary (processor 2) PCI riser connector
27 Secondary (processor 2) PCIe riser connector
28 System battery
29 Serial port connector
System maintenance switch descriptions System maintenance switch descriptions
Position Position Default Default
1
S1 Off
S2 Off
S3 Off
S4 Off
S5 Off
2 3
S6 , Off
S7 Off
S8 —
S9 —
S10 —
S11 —
S12 —
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see
Secure Boot
.
DIMM label identification DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to
Function Function
Off = iLO security is enabled.
On = iLO security is disabled.
Reserved
Reserved
Reserved
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off = No function
On = Restore default manufacturing settings
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 133