HPE ProLiant DL385 Gen10 Plus v2 Maintenance And Service Manual page 49

To replace the component, reverse the removal procedure.
Removing and replacing a hot-plug SAS, SATA or NVMe drive Removing and replacing a hot-plug SAS, SATA or NVMe drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated CAUTION:
with either a component or a blank.
Procedure Procedure
1. Back up all server data on the drive.
2. If installed, remove the front bezel .
3. Observe the drive LED status and determine if it can be removed.
4. Remove the drive.
LFF drive
SFF drive
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide 49