Table of Contents
Advertisement
c. Place the heatsink on a flat work surface with its contact side facing up.
12. Use an alcohol wipe to remove the existing thermal grease from the heatsink and the processor.
Allow the alcohol to evaporate before continuing.
13. Use a screwdriver to loosen the three captive screws in the sequence shown and then pivot the force frame up.
14. Remove the processor:
a. Hold the lift tabs near the front end of the rail frame, and then pivot the rail frame to the vertical position.
b. Slide the processor out of the rail frame.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide
110
Advertisement
Table of Contents
