Table of Contents
Advertisement
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or assembly. Use one or more of the following methods
when handling or installing electrostatic-sensitive parts:
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps
with a minimum of 1 megohm ±10 percent resistance in the ground cords. To provide proper ground, wear the strap snug
against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when standing on conductive
floors or dissipating floor mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install the part.
For more information on static electricity or assistance with product installation, contact an authorized reseller.
Symbols on equipment
Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions:
This symbol in conjunction with any of the following symbols indicates the presence of a potential hazard. The potential for injury
exists if warnings are not observed. Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified
personnel.
WARNING:
WARNING:
To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all maintenance,
upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no user or field-serviceable parts. Do not open for
any reason.
WARNING:
WARNING:
To reduce risk of injury from electric shock hazards, do not open this enclosure.
HPE ProLiant DL385 Gen10 Plus v2 Server Maintenance and Service Guide
40
Advertisement
Table of Contents
