Storing & Editing Fax Numbers (Functions 31 & 32); Storing, Editing & Erasing Quick Dial Numbers (Function 31) - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 30 Thursday, September 2, 1999 10:03 AM
Faxing
Storing & Editing Fax Numbers (Functions
31 & 32)
G4 user ISDN INTERFACE UNIT TYPE 190 option installed please see P.187 "Stor-
ing a Telephone Number".
You can store numbers that you often
use in the machine's memory. A
stored number will remain in memo-
ry even if the power is cut.
You can store numbers in two ways.
Quick Dials
4
The number is assigned to its own
key. To dial that number, just press
the key. You can store up to 30
numbers in this way.
Speed Dials
The number is given a two-digit
code. To dial the number, press the
{Speed Dial} key and enter the
code. There are 100 Speed Dial
codes available numbered 00 to 99.
Storing, Editing & Erasing
Quick Dial Numbers (Function
31)
This procedure describes how to store
and edit fax numbers in Quick Dial
keys.
A
Press { { { { Function} } } } { { { { 3} } } } { { { { 1} } } } then the
{ { { { Yes} } } } key.
ak
PRINT LISTh/SEARCHi
B
Select a Quick Dial in any one of
the following ways:
•Press a Quick Dial key (e.g. press
Quick Dial 01).
30
a01 PROGRAM?
• Press the V key until the Quick
Dial you want appears on the dis-
play.
C
Press the { { { { Yes} } } } key.
a01
kkkkkkkkkkkkkkkkkkkk
D
Do one of the following:
•Enter the fax number you wish to
store in this Quick Dial using the
ten key pad. Then press the {Yes}
key.
a01
212551234kkkkkkkkkkk
•To clear the number, press {No},
{Yes} then go to step J.
E
Do one of the following:
•If you wish to enter or edit a label
QUICK/hi
for this Quick Dial, press the {Yes}
key.
a01
PROGRAM LABEL?
Note
To print a list of all Quick Dials
and their contents, press W
{Yes} then the {Start} key.
KPAD/N
KPAD/Y/N
Y/hi
Y/N