Handling And Connecting Fibers; Figure 2-2: Typical 2405Eo-Hd Certification And Identification Label - evertz 2405EO-HD Instruction Manual

Figure 2-2: Typical 2405EO-HD Certification and Identification Label

2.1.4. Handling And Connecting Fibers

Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to properly clean the optical end
facet of a connector before making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
recommends that you maintain a minimum bending radius of 5 cm to avoid fiber-bending loss that will
decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with
cable lockout devices, to prevent the user from damaging the fiber by installing a module into a slot in the
frame that does not have a suitable I/O module.
2405EO-HD SMPTE292M Re-Clocking Electrical to Fiber Converter
(Serial # and bar code differ from unit to unit)
Revision 1.3
2400 Series Fiber Converter Manual
Evertz
2405EO-HD-5