NEC 78K0R/KE3 User Manual page 860

Page
CHAPTER 11 SERIAL ARRAY UNIT (continuation)
p.406 Change of Figure 11-61. Flowchart of Slave Reception (in Single-Reception Mode)
p.408 Addition of Caution to Figure 11-62. Example of Contents of Registers for Slave
Transmission/Reception of 3-Wire Serial I/O (CSI00, CSI10)
p.409 Addition of Caution to Figure 11-63. Initial Setting Procedure for Slave Transmission/Reception
p.411 Change of Figure 11-65. Procedure for Resuming Slave Transmission/Reception and
addition of caution.
p.413 Change of Figure 11-67. Flowchart of Slave Transmission/Reception (in Single-
Transmission/Reception Mode) and addition of caution.
p.415 Change of Figure 11-69. Flowchart of Slave Transmission/Reception (in Continuous
Transmission/Reception Mode) and addition of caution.
p.431 Change of Figure 11-79. Example of Contents of Registers for UART Reception of UART
(UART0, UART1, UART3) (1/2)
p.434 Change of Figure 11-82. Procedure for Resuming UART Reception
p.436 Change of Figure 11-84. Flowchart of UART Reception
p.450 Change of 11.7 Operation of Simplified I
p.451 Change of transfer rate in 11.7.1 Address field transmission
p.456 Change of transfer rate in 11.7.2 Data transmission
p.459 Change of error detection flag and transfer rate in 11.7.3 Data reception
p.464 Addition of Caution to 11.7.5 Calculating transfer rate
p.464 Change of Remark in 11.7.5 Calculating transfer rate
p.467 Addition of Figure 11-105. Processing Procedure in Case of Parity Error or Overrun Error
CHAPTER 12 SERIAL INTERFACE IIC0
p.482 Change of description of STT0 bit in Figure 12-6. Format of IIC Control Register 0 (IICC0) (3/4)
CHAPTER 14 DMA CONTROLLER
p.554 Addition of Note to Figure 14-4. Format of DMA Mode Control Register n (DMCn) (1/2)
p.560 Change of description in 14.5.1 CSI consecutive transmission
p.561 Change of description in Figure 14-7. Setting Example of CSI Consecutive Transmission
p.562 Addition of 14.5.2 CSI master reception
p.564 Addition of 14.5.3 CSI transmission/reception
p.570 Change of description in 14.5.6 Holding DMA transfer pending by DWAITn
p.570 Addition of Caution to Figure 14-12. Example of Setting for Holding DMA Transfer Pending
by DWAITn
p.571 Change of 14.5.7 Forced termination by software
p.573 Change of (1) Priority of DMA in 14.6 Cautions on Using DMA Controller
p.574 Change of (2) DMA response time in 14.6 Cautions on Using DMA Controller
p.575 Change of description in (4) DMA pending instruction in 14.6 Cautions on Using DMA
Controller
CHAPTER 15 INTERRUPT FUNCTIONS
p.579 Change of (B) External maskable interrupt (INTPn) in Figure 15-1. Basic Configuration of
Interrupt Function
Remark "Classification" in the above table classifies revisions as follows.
(a): Error correction, (b): Addition/change of specifications, (c): Addition/change of description or note,
(d): Addition/change of package, part number, or management division, (e): Addition/change of related
documents
860
APPENDIX C REVISION HISTORY
Description
2
C (IIC10) Communication
User's Manual U17854EJ9V0UD
(3/5)
Classification
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(b)
(b)
(b)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)
(c)