Configuring A Hybrid-Port-Based Vlan - H3C S3100 Series Operation Manual

Operation Manual (For Soliton) – VLAN
H3C S3100 Series Ethernet Switches
To do...
Enter VLAN view
Add an Access port
to the current VLAN
Follow these steps to configure the Access-port-based VLAN in Ethernet port view:
Enter system view
Enter Ethernet port view
Configure the port link
type as Access
Add the current Access
port to a specified VLAN
Note:
To add an Access port to a VLAN, make sure the VLAN already exists.

2.2.2 Configuring a Hybrid-Port-Based VLAN

A Hybrid port may belong to multiple VLANs, and this configuration can only be
performed in Ethernet port view.
Follow these steps to configure the Hybrid-port-based VLAN:
Enter system view
Enter Ethernet port view
Configure the port link
type as Hybrid
Use the command...
vlan vlan-id
port interface-list
To do...
system-view
interface interface-type
interface-number
port link-type access
port access vlan vlan-id
To do...
system-view
interface interface-type
interface-number
port link-type hybrid
Required
If the specified VLAN does not exist,
this command be created first
creates the VLAN before entering its
view.
Required
By default, system will add all ports
to VLAN 1.
Use the command...
Use the command...
2-4
Chapter 2 VLAN Configuration
Remarks
Remarks
—
—
Optional
The link type of a port is
Access by default.
Optional
By default, all Access
ports belong to VLAN 1.
Remarks
—
—
Required