Table of Contents
Advertisement
Related commands
ipv6 neighbor
reset ipv6 neighbors
display ipv6 neighbors count
Use
display ipv6 neighbors count
Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] |
interface interface-type interface-number | vlan vlan-id } count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Displays the total number of all neighbor entries, including neighbor entries created
all
dynamically and configured statically.
: Displays the total number of neighbor entries created dynamically.
dynamic
: Displays the total number of neighbor entries configured statically.
static
slot slot-number
interface interface-type interface-number
number.
vlan vlan-id
range for VLAN ID is 1 to 4094.
Examples
# Display the total number of neighbor entries created dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total number of dynamic entries: 2
display ipv6 neighbors entry-limit
Use
display ipv6 neighbors entry-limit
that a device supports.
Syntax
display ipv6 neighbors entry-limit
Views
Any view
Predefined user roles
network-admin
network-operator
: Specifies the slot number of the device, which is fixed at 1.
: Displays the total number of neighbor entries in the specified VLAN. The value
to display the number of neighbor entries.
: Specifies an interface by its type and
to display the maximum number of ND entries
9
Advertisement
Chapters
Table of Contents
