Ipv6 Bandwidth-Based-Sharing; Ipv6 Hop-Limit - H3C S6550X-HI Series Command Reference Manual

Related commands
ipv6 prefix
ipv6 dhcp client pd

ipv6 bandwidth-based-sharing

Use
ipv6 bandwidth-based-sharing
Use
undo ipv6 bandwidth-based-sharing
bandwidth.
Syntax
ipv6 bandwidth-based-sharing
undo ipv6 bandwidth-based-sharing
Default
IPv6 load sharing based on bandwidth is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature load shares IPv6 traffic among multiple output interfaces based on their load
percentages. The device calculates the load percentage for each output interface in terms of the
interface expected bandwidth.
For devices that run load sharing protocols, they implement load sharing based on the ratios
defined by these protocols.
Examples
# Enable IPv6 load sharing based on bandwidth.
<Sysname> system-view
[Sysname] ipv6 bandwidth-based-sharing

ipv6 hop-limit

Use ipv6 hop-limit
Use
undo ipv6 hop-limit
Syntax
ipv6 hop-limit value
undo ipv6 hop-limit
Default
The hop limit is 64.
Views
System view
Predefined user roles
network-admin
to enable IPv6 load sharing based on bandwidth.
to set the Hop Limit field in the IPv6 header.
to restore the default.
35
to disable IPv6 loading sharing based on