Assigning A Trunk Port To A Vlan; Assigning A Hybrid Port To A Vlan - H3C S7500X Series Configuration Manual

Step
access.
4. (Optional.) Assign the
access port to a VLAN.

Assigning a trunk port to a VLAN

A trunk port supports multiple VLANs. You can assign it to a VLAN in interface view.
When you assign a trunk port to a VLAN, follow these restrictions and guidelines:
•
To change the link type of a port from trunk to hybrid, set the link type to access first.
•
To enable a trunk port to transmit packets from its PVID, you must assign the trunk port to the
PVID by using the port trunk permit vlan command.
To assign a trunk port to one or multiple VLANs:
Step
1. Enter system view.
2. Enter interface view.
3. Set the port link type to
trunk.
4. Assign the trunk port to
the specified VLANs.
5. (Optional.) Set the
PVID for the trunk port.

Assigning a hybrid port to a VLAN

A hybrid port supports multiple VLANs. You can assign it to the specified VLANs in interface view.
Make sure the VLANs have been created.
When you assign a hybrid port to a VLAN, follow these restrictions and guidelines:
•
To change the link type of a port from trunk to hybrid, set the link type to access first.
•
To enable a hybrid port to transmit packets from its PVID, you must assign the hybrid port to the
PVID by using the port hybrid vlan command.
To assign a hybrid port to one or multiple VLANs:
Step
1. Enter system view.
2. Enter interface view.
Command
port access vlan vlan-id
Command
system-view
•
Enter Layer 2 Ethernet interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface view:
interface bridge-aggregation
interface-number
port link-type trunk
port trunk permit vlan { vlan-id-list | all }
port trunk pvid vlan vlan-id
Command
system-view
•
Enter Layer 2 Ethernet interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface view:
interface bridge-aggregation
6
Remarks
access ports.
By default, all access ports
belong to VLAN 1.
Remarks
N/A
N/A
By default, all ports are
access ports.
By default, a trunk port
permits only VLAN 1.
The default setting is VLAN
1.
Remarks
N/A
N/A