Pushbuttons - Smartgen HGM9510N User Manual

4.2

PUSHBUTTONS

Icons
Stop
Start
Manual Mode
Auto Mode
Mute/Reset Alarm
Fn
Close
Open
Up/Increase
Down/Decrease
Left
Right
Set/Confirm
Exit
NOTE: Press and
the controller shall not judge whether the genset start is successful or not according to the starting conditions. It is
controlled by the operator. When operator observes that the genset has started, he/she should release the button and the
start output will be deactivated. Safety on delay will be initiated.
HGM9510N/HGM9530N Paralleled Genset Controller User Manual
Table 5 Button Function Description
Buttons
Stop the running generator in Auto/Manual mode;
Reset alarm in stop mode;
Lamp test (press at least 3 seconds);
During stopping process, press this button again to stop the
generator immediately.
Start the genset in Manual mode.
Press this key and the controller goes in Manual mode.
Press this key and controller goes in Auto mode.
Remove the alarm sound;
Remove the alarm by pressing for over 3s.
Shortcut button by making groups with other buttons; or other
function button (power button, stop button etc.) by setting.
Close the breaker in manual mode.
Open the breaker in manual mode.
1) Screen scroll;
2) Move up the cursor and increase value in setting menu.
1) Screen scroll;
2) Move down the cursor and decrease value in setting menu.
1) Page scroll;
2) Left move the cursor in setting menu.
1) Page scroll;
2) Right move the cursor in setting menu.
1) Enter setting screen;
2) Return to previous menu in setting menu.
1) Return to main menu;
2) Return to previous menu in setting menu.
simultaneously in manual mode and it can force the generator to crank. At this time
Description
Page 13 of 116