Operation; Pushbuttons - Smartgen HGM400 Series User Manual

4 OPERATION

4.1 PUSHBUTTONS

Stop/ Reset
Start
Manual
Auto
Set/Confirm
Up/Increase
Down/Decrease
HGM400 Series Genset Controller
HGM400 Series Genset Controller User Manual
Stop running generator in Auto/Manual mode;
In case of alarm condition, pressing the button will reset
alarm;
In stop mode, pressing and holding the button for 3
seconds will test indicator lights (lamp test);
During stopping process, press this button again to stop
generator immediately.
Start genset in Manual/Test mode.
Pressing this key will set the module into manual mode.
Pressing and
adjust LCD contrast.
Pressing this key will set the module into auto mode.
Pressing this key will enter into Main Menu;
In setting parameter status, press this key will shift cursor
or confirm setting value.
Scrolls the screen up;
Shift the cursor up or increase the set value in
parameter setting menu.
Scrolls the screen down;
Shift the cursor down or decrease the set value in
parameter setting menu.
ISSUE 2015-05-27
(or ) simultaneously can
Version 1.6 Page 9 of 44