Pushbuttons - Smartgen HGM9560 User Manual

4.2 PUSHBUTTONS

Icon
Stop
Start
Manual Mode
Auto Mode
Mute/Reset Alarm
Bus Close/Open
Mains Close/Open
Up/Increase
Down/Decrease
Left
Right
Set/Confirm
Exit
WARNING: Default password is 00318, user can change it in case of others change the advanced
parameters setting. Please clearly remember the password after changing. If you forget it, please contact
Smartgen services and send all PD information in the controller page of "ABOUT" to us.
HGM9560 Bus Tie Mains Parallel Unit
Table 5 Keys Functions
Function
When the controller is in Auto/Manual mode, press this button will
stop the system generators (if the generators are in Auto mode).
Reset alarm in stop mode;
Lamp test (press at least 3 seconds);
When the controller is in Manual mode, press this button will start
the system generators (if the generators are in Auto mode).
Press this key and controller enters in Manual mode.
Press this key and controller enters in Auto mode.
Alarming sound off; If trip alarm occurs, pressing the button at
least 3 seconds can reset this alarm.
Can control bus to switch on or off in Manual mode.
Can control mains to switch on or off in Manual mode.
1) Screen scroll;
2) Up cursor and increase value in setting menu.
1) Screen scroll;
2) Down cursor and decrease value in setting menu.
1) Screen scroll;
2) Left move cursor in setting menu.
1) Screen scroll;
2) Right move cursor in setting menu.
1) Pressing and holding for more than 3 seconds enters
parameter setting menu;
2) In settings menu confirms the set value.
1)Return to main menu;
2) Return to previous menu in setting menu.
Description
Page 10 of 47