Pushbuttons - Smartgen HGM8156 User Manual

4.2 PUSHBUTTONS

Icons Keys
Stop
Start
Manual Mode
Auto Mode
Mute/Reset Alarm
Bus Close/Open
Mains Open/Close
Set/Confirm
Up/Increase
Down/Decrease
Left
Right
Confirm
Exit
HGM8156 Genset Parallel (With Mains) Controller
HGM8156 GENSET PARALLEL CONTROLLER USER MANUAL
Table 5 Button Description
Description
In manual/auto mode, press and controller will issue stop
command, and can stop all running gensets that are permitted to
be stopped ( in auto mode);
In stop mode, press and it can reset alarms;
Press for over 3s, and it can test whether panel indicators are
normal (lamp test).
In manual mode, press and controller will issue start command,
and can start all gensets that are allowed to start (in auto mode).
Press and it can put controller in manual mode.
Press and it can put controller in auto mode.
Clear up alarm sound;
Reset trip alarm by pressing over 3s if trip (not shutdown) alarm
occurs.
Control busbar close/open in manual mode.
Control mains close/open in manual mode.
Press and enter setting screen.
1) Screen scroll;
2) Move up cursor and increase value in setting menu.
1) Screen scroll;
2) Move down cursor and decrease value in setting menu.
1) Page scroll;
2) Left move cursor in setting menu.
1) Page scroll;
2) Right move cursor in setting menu.
Confirm the inputted content in setting menu.
1)Return to main screen;
2) Return to previous menu in setting menu.
2019-09-10 Version 1.1 Page 10 of 44