—
Control and protection function: automatic start/stop of the diesel genset, ATS (Auto Transfer
Switch) control and perfect 2-class fault indication and protection function etc.;
—
Parameter setting function: parameters can be modified by users and stored in internal EEPROM
memory, and cannot be lost even in case of power outage; most of them can be adjusted from the front
panel of the controller and all of them can be modified on PC by RS485 ports;
—
Multiple crank disconnect conditions (speed, engine oil pressure, generator frequency) are
optional;
—
Wide power supply range DC(8~35)V, suitable for different starting battery voltage environment;
—
Event log, real-time clock, scheduled start & stop function (allowing to start the genset once a
day/week/month with load or not);
—
Alarm data record function, which allows to record the genset data of 5 alarms;
—
Accumulated run time of A and B and accumulated electric energy of A and B; Users can reset
them and start afresh, providing convenience for users;
—
Heater, cooler and fuel pump control functions;
—
Maintenance function; maintenance time due actions can be set;
—
All parameters apply digital adjustment, getting rid of conventional analogue modulation with
normal potentiometer, and improving genset reliability and stability;
—
IP65 waterproof level is achieved with the help of rubber-ring gasket between shell and control
panel;
—
Metal fixing clips employed to fix the controller and make it perform better under high temperature
environment;
—
Modular structure design, anti-flaming ABS plastic enclosure, pluggable terminal, built-in mounting,
compact structure with easy installation;
HGM9510N/HGM9530N Paralleled Genset Controller User Manual
Page 8 of 116