Enabling Readimanager Lx100 On The Ipower - Polycom ReadiManagerLX100 Management Manual

Appendix
Enabling Polycom ReadiManager LX100 on the iPower
Two items need to be configured in the iPower system before Polycom ReadiManager LX100 can manage the iPower.
•
•
An optional but recommended item would be to change the iPower system password.
Enable WebRemote in iPower AdminTools
1. Go to Start > PictureTel iPower > Administrator Information > Admin Tools.
2. In the main navigation section, click on Utilities, then click on the Network Management Tab.
3. Check "Allow Web Remote Management".
Configuring the gms_admin user
1. Go to Start Menu > Settings > Control Panel > Administrative Tools > Computer Management >
2. In the side navigation under System Tools, click on Local Users and Groups and then Users.
3. Click on gms_admin users in the User List. Open the Properties window.
4. In the General Tab, make sure that "Account is disabled" is unchecked and apply the changes.
Changing the iPower password
It is also a good idea to change the default blank password to something else for security reasons.
1. Go to Start Menu > Settings > Control Panel > Administrative Tools > Computer Management >
2. In the side navigation under System Tools, click on Local Users and Groups and then Users.
3. Click on gms_admin users in the User List.
4. Select the menu item Action -> Set Password.
This password also needs to be entered into Polycom ReadiManager LX100 when adding the iPower system to the
list of managed systems.
Polycom ReadiManager LX100 User Guide
Enable WebRemote in the iPower.
Configure the gms_admin user in the Administrator Tools folder in Windows.
Appendix 92