Modifying The System List - Polycom ReadiManagerLX100 Management Manual

Modifying the System List

The utility buttons on the right hand side of the screen allow you to change the information in the system list.
Searching for Systems
One way to add a system is to search for units of a certain device type. The search function allows you to find video
endpoints connected to the network but not yet managed by the program.
1. To search for addresses, click on Search. The search dialog box appears.
2. ViewStation, ViewStation FX and EX, V-Series, ViaVideo and iPower are default to check. If desired, uncheck
3. Enter the Start and End IP addresses. The End IP field will auto complete the range that you entered in the
4. Click on OK to start search. All of the systems found on that subnet not yet managed by ReadiManager LX100
5. The results will return with all systems auto-selected. Deselect the systems you do not wish to Manage, then
Polycom ReadiManager LX100 User Guide
Search Search for systems on the network which have not been added
to the database. After performing a search, system can be added
from the query results
Add System Allows you to add a system to the database to be managed by
ReadiManager LX100
Delete System Removes a system from the database
Edit System Informs ReadiManager LX100 a system IP address and password
change or enables device tracing for a system.
the device type that does not require search.
Start IP field.
will be listed.
click on Manage Selected Systems.
Chapter 2 System Management 12