Polycom ReadiManagerLX100 Management Manual page 120

Appendix
System Information Window - iPower
Interface Tab
The type of network connections, associated addresses and network names for the selected iPower are revealed in
this window.
Polycom ReadiManager LX100 User Guide
Field
WAN enabled
WAN Type
Video Number
Line Status
LAN enabled
IP Address
Use Gatekeeper
Gatekeeper Address
H.323 Name (video)
H.323 Ext (video)
H.323 Name (voice)
H.323 Ext (voice)
Description
States whether this iPower is connected to the WAN
The type of WAN interface connected to the iPower such as ISDN
BRI, ISDN Quad-BRI, V.35/RS-449, PRI, etc.
Video Number of iPower
Shows the status of each WAN interface line connected to the
system. A green arrow indicates the line is initialized and ready,
a red arrow indicates the line is not connected or not functioning
properly and a yellow block indicates the line is being initialized
Indicates whether this iPower is connected to the LAN
IP Address of the iPower
Notes whether this iPower is configured to registered with a
Gatekeeper. This can be 'Yes' indicates a Gatekeeper registration
but not an active connection to Gatekeeper.
Gatekeeper IP address which this iPower is configured to register
with
The name that other H.323-enabled systems may use to call this
unit.
Also known as the E.164 ID. An extension that allows system to
call this system through an H.320 to H.323 gateway.
The name that other H.323-enabled systems may use to call this
unit, for voice-only calls (VoIP)
Also known as the E.164 ID. An extension that allows system to
call this system, for voice-only calls (VoIP)
Appendix 113