Polycom ReadiManagerLX100 Management Manual page 45

Global Directory Configuration
Configuring your Server to Allow Updates to the Active Directory Schema
1. Open a DOS command prompt.
2. Run command: "regsvr32 c:\winnt\system32\schmmgmt.dll". If successful a window will appear and state Dll
3. From the Start Menu:
4. From the console drop down menu: select Add/Remove Snap in. A new window will open up.
5. In Add/Remove Snap-in window:
6. Click on Add and select "Active Directory schema" from list.
7. Click on Add then click Close.
8. Close "Add/Remove Snap-in" window by clicking on OK.
9. From the console window:
10. In this window:
11. Select Operations Master from the action pull down menu.
12. Change Schema Master window opens up. Make sure that the "Schema may be modified on this Domain
13. Select OK and close window.
Polycom ReadiManager LX100 User Guide
Register Server Succeeded.
Select Run and type the following command line: "mmc /a" and the Microsoft Management Console window
will open up.
Select Active Directory Schema in the left pane within the console
Controller" is checked.
Chapter 3 Global Directory 38