Polycom ReadiManagerLX100 Management Manual page 55

Updating Endpoint Software
Update Function
1. Choose the option "Now" or "Later".
2. Click on OK.
Now
Choosing Now will result in the immediate software update of the selected Polycom video endpoints.
Later
The Later option allows you to update devices by Server Date/Time or by Device Date/Time.
When clicking on Update Later, a dialog box will appear requesting the date and time.
•
•
Server Date/Time
Choosing Server Date/Time will update the endpoint software once the designated time takes place where the
Server is housed. For instance, if the server is housed in Austin, TX and the endpoint is housed in Raleigh, NC and the
designated time for Software Update is 22:00:00(GMT-5) or (10:00pm CDT), the time that endpoint will be updated is
23:00:00(GMT-4) or (11:00pm EDT).
This is for ViewStation and V Series only
Remove Address Book entries -Yes indicates that Address book entries will be removed after an update
Remove System files - Yes indicates the endpoint settings will be removed after an update
Passive FTP - Software Update will be performed in Passive FTP vs. Active FTP mode.
Allow endpoint to be a DHCP server - Yes indicates that the endpoint will be a DHCP server.
Polycom ReadiManager LX100 User Guide
Enter the date in the following format: dd/mm/yyyy
Using the radio button, you can then choose to update by either Server Date/Time, or Device Date/Time.
NOTE
If your endpoints are networked worldwide, you must take into consideration the activity time frame for each
endpoint when Update All at Server Date/Time is selected.
Chapter 4 Software Update 48