Polycom ReadiManagerLX100 Management Manual page 121

Appendix
System Information Window - iPower
Call Status Tab
This table displays the following Call Status information for the selected iPower. On this screen you will find detailed
information regarding the video call. All calls are represented by a single ball, regardless of the number of channels
used. When the call status ball is green, that system is in a call and all the data shown in this window is current for
that system. If the call status ball is gray, the data shown represents information for that last incoming or outgoing
call.
ISDN voice and VoIP call info is not supported here.
Polycom ReadiManager LX100 User Guide
Field
State
Call ID
Rate
H.320 calls placed
H.320 calls received
H.323 calls placed
Voice calls placed
Voice calls received
Time in calls
Time in voice calls
Time in calls since restart
Time in voice calls since restart
Uptime since restart
Description
Current state of the call. "Call Cleared" means last call ended
normally. "Call disconnected" means last call ended abnormally.
"Call failed" means last call did not connect.
The phone number of the system that iPower is connected to at this
moment
Rate at which the current call is made
Number of H.320 calls placed since system installation, including
failed calls.
Number of H.320 calls received since system installation, including
failed calls.
Number of H.323 calls placed since system installation, including
failed calls and VoIP calls.
Number of ISDN voice calls placed since system installation,
including failed calls.
Number of ISDN voice calls received since system installation,
including failed calls.
Time in H.320, H.323, and VoIP calls since system installation
Time in ISDN voice calls since system installation
Time in H.320, H.323, and VoIP calls since system restart
Time in ISDN voice calls since system restart
Time system has been up since restart
Appendix 114