Polycom ReadiManagerLX100 Management Manual page 176

Appendix
iPower Admin Setup Menu
Admin Tools :: Video ::
Video Algorithm
iPower Field
Video algorithm for ISDN
calls
Video algorithm for LAN
calls
Flicker Reduction
iPower Field
Check this to eliminate
video artifacts caused by
using an NTSC camera and
50 Hz fluorescent lighting.
Dual Images
iPower Field
Enable (Share bandwidth
between People and
Content)
Allow system to
dynamically adjust People
and Content bandwidth
allocation]
Disable
Polycom ReadiManager LX100 User Guide
Video Preferences
Type Meaning
Pull down menu This video algorithm determines the encoding law used on
calls over an ISDN network. For instructions on choosing the
algorithm, see
the iPower administrator guide.
Pull down menu This video algorithm determines the encoding law used on calls
over a LAN network. For instructions on choosing the algorithm,
seethe iPower administrator guide.
Type Meaning
Check box Check or uncheck the box, depending upon the type of monitor
and lighting.
Type Meaning
Radio button Enables the iPower collaboration system to share bandwidth
between People and Content when Content is being shown.
This allows conference participants to see both People and
Content simultaneously.
Check box Select this option if you want the system to allocate bandwidth
to the video source (People or Content) that needs it the most
at any given time. For example, if a conference participant is
presenting a slide show, the system provides more bandwidth
to Content when the participant changes a slide.
Radio button Use Disable only when you want to allow more bandwidth for
content images so they can be transmitted with greater clarity.
Appendix 169