Polycom ReadiManagerLX100 Management Manual page 142

Appendix
ViewStation Admin Setup Menu
System Info :: Admin Setup :: LAN / H.323 ::
Dialing Rules 1
ViewStation Field
Number of Digits in
Extension
International Dialing Prefix
Public Network Access
Public Network Dialing
Prefix
Public Network Prefix
(same area code)
Private Network Access
Private Network Prefix
area code)
Dialing Rules 2
ViewStation Field
Always dial area code
Area Code
Prefix
Polycom ReadiManager LX100 User Guide
Type
User Defined Value
User Defined Value
Drop Down Menu
User Defined Value
User Defined Value
Drop Down Menu
User Defined Value
(same
Type
Checkbox option
User Defined Value
User Defined Value
Global Address
Meaning
Sets the number of digits in the dialing extension. Usually
applies to systems that are on a PBX.
Prefix required to place international calls. This prefix is
automatically appended to any international calls made from
the Global Directory. This overrides the international dialing
prefix that is normally set in the ViewStation Country Setup
screen.
Enables this system to dial calls outside of your private
network.
Dialing prefix as required by the PBX to dial out to the public
network. This prefix is automatically inserted before the dialing
numbers to the public network from the Global Directory.
Dialing prefix required by your PBX to dial out to the public
network. This prefix is automatically inserted before the dialing
numbers to the public network in the Global Directory.
Enables this system to use a private network for calls.
Dialing prefix that is used to access an organization from
outside the private network.
Meaning
Checked - User will need the area code to dial sites that have
the same local area code as the ViewStation.
Area code for configuration
Set prefixes dialed before the area code.
Appendix 135