Polycom ReadiManagerLX100 Management Manual page 168

Appendix
iPower Admin Setup Menu
Admin Tools :: General ::
Monitor
iPower Field
Use second monitor
Picture-in-Picture (PIP)
Position on Second Monitor
Polycom ReadiManager LX100 User Guide
Monitor
Type Meaning
Check box Check the box if your system uses a second monitor. The system
automatically sets the second monitor's type (NTSC or PAL) to
match the main camera type.
Radio button If you are using a second monitor with your system, you can
change the position of the PIP (Picture-in-Picture) on the second
monitor. The default setting is Bottom Right. Changes to this
setting take effect immediately.
Appendix 161