Polycom ReadiManagerLX100 Management Manual page 96

Remote Alert Notification
SNMP Configuration
Notification Configuration
Polycom ReadiManager LX100 User Guide
Message
System(s) is/are not responding
Connectivity problem
System(s) reporting errors
System reporting warnings
System(s) requesting help
NOTE
If your system does not have SNMP, this function will be disabled. You will not be able to configure the traps for
errors that occur in your network. To enable an SNMP agent, install the Microsoft SNMP from a Windows 2000 or
2003 CD.
Example of Problem
System is off, Network issues, not reachable by IP
Indicates that Polycom ReadiManager LX100 is able to query
the system, but is unable to receive status updates.
Lost Gatekeeper
The video endpoint cannot find the gatekeeper that it
normally registers with. The gatekeeper might be in an
offline state.
Microphone unplugged
The iPower is detected to have unplugged microphone from
the main unit of the video endpoint.
Camera unplugged
The iPower is detected to have an unplugged camera from the
main unit of the video endpoint.
Video mode
Major error occurring on MGC unit or in one of the cards
Low Battery
The battery in the video endpoint remote control is running
low.
Lost Directory Server
The iPower cannot display the Global Directory. The Directory
server may be offline.
Web Server Redirect
Redirect response string (HTTP 3XX) returned from an Other
Device server.
iPower User Interface not running
The iPower user interface is not operating
Minor error occurring on MGC unit or in one of the cards
User requested assistance
Chapter 8 System Configuration 89