Device Specific Configuration - Polycom ReadiManagerLX100 Management Manual

Server Preferences
Device Specific Configuration
Select the desired device type from the pull-down menu.
For all Devices
Polling
The devices that are managed are polled at an interval based on the device type shown in the table below.
If your settings are left at the default, the system will poll a specific ViewStation, for example, every 5 minutes. Note
that, if a ViewStation is turned off within that 5 minute cycle, it will not be designated online until it is polled again
(up to 5 minutes later). If the ViaVideo application is closed but it's PC remains connected to the network, it will
immediately show up as not responding.
You can change the default setting to have more frequent polling. However if a video device is in a call, the video
quality during the call may be compromised.
To change the polling frequency
1. Select the device type from the pull-down menu.
2. Change the value to the desired value representing the time between polls. Remember
3. Click on Update Setting.
Polycom ReadiManager LX100 User Guide
Device Type
ViewStation and FX/EX and V-Series
ViaVideo
iPower
PathNavigator
MGC
WebCommander
Other
Default Cycle
300 sec
600 sec
300 sec
300 sec
120 sec
300 sec
300 sec
Chapter 8
this is in seconds.
System Configuration 80