Polycom ReadiManagerLX100 Management Manual page 134

Appendix
ISDN Cause Codes
Cause
Code
29
30
31
34
38
41
42
43
44
47
49
50
57
58
Polycom ReadiManager LX100 User Guide
Cause Description
Facility rejected
Response to STATUS ENQUIRY
Normal, unspecified
No circuit/channel available
Network out of order
Temporary failure
Switching equipment congestion
Access information discarded
Requested circuit/channel not
available
Resource unavailable, unspecified
Quality of service unavailable
Requested facility not sub
scribed
Bearer capability not authorized The caller has requested a bearer capability that the network can provide,
Bearer capability not presently
available
Definition
The network cannot provide facility requested by the user.
The prior receipt of a status inquiry message generated the status message.
A normal even has occurred with no standard cause applying. No resulting
action is required.
The call cannot be taken because no appropriate channel is available to
establish the connection.
The network is not functioning correctly and this condition may persist for
an extended period. The call can not reach the destination and an immediate
attempt to reconnect will probably fail.
The network is not functioning correctly and an error occurred. The problem
will be resolved shortly.
The network switching equipment is temporarily overloaded and the
destination can not be reached.
The network cannot provide the requested access information.
An unknown reason prevents the remote equipment from providing the
requested channel. This might be a temporary problem.
An unknown reason prevents the remote equipment from providing the
requested channel. This might be a temporary problem.
The network cannot provide the requested quality of service (as defined by
CCITT recommendation X.213). This might be a subscription problem.
The remote equipment supports the requested supplementary service, but
only by subscription.
but the user is not authorized to use. This might be a subscription problem.
The network normally provides the requested bearer capability, but not at
the present time. This might be due to a temporary network problem or to a
subscription problem.
Appendix 127