Polycom ReadiManagerLX100 Management Manual page 21

Modifying the System List
Adding a System
Adding a PathNavigator or a WebCommander
1. Click on Add System. A new window will appear.
2. Choose PathNavigator or Web Commander from the pull down menu.
3. Enter the IP address or LAN host name of the system and the name you would like to identify this system by.
4. Click on OK. The System Management window will refresh and the device name and address will appear.
Adding an MGC
1. Click on Add System. A new window will appear.
2. Choose MGC from the pull down menu.
3. Enter the IP address or LAN host name of the system and the name you would like to identify this system by.
4. Enter the Login and password for the MGC.
5. Enter the computer name which is the name of the ReadiManager LX100 and is displayed in the MGC
4. Click on OK. The System Management window will refresh and the device name and address will appear.
Adding an Other Device (Third Party)
Third party devices can be added to ReadiManager LX100 for monitoring if it has a web-based interface.
1. Click on Add System. A new window will appear.
2. Choose the device type "Other" from the pull down menu.
3. Click on OK. The System Management window will refresh and the device name and address will appear.
Polycom ReadiManager LX100 User Guide
Manager UI as part of the "Connection" information.
NOTE
An MGC-25 is not manageable by ReadiManager LX100.
Enter the following information:
• IP Address or LAN Host Name
• Port: Port on the device used to access the device's management interface.
• Name: The name that you would like to call the system
• File (Optional): Web management entry file. If the device's web server has the appropriate default
website; no file is necessary
Management URL: This is a read only field which displays the specified URL which ReadiManager LX100
will use to access the web interface.
Chapter 2 System Management 14