Editing A Profile - Polycom ReadiManagerLX100 Management Manual

Provisioning Configurations
Add Profile Window cont.
3. Enter the necessary information required by the fields. When "Enable this for provisioning" is checked, all
4. Navigate to the next section. Repeat step 3.
5. Once the profile configuration is complete, click on the Save Profile button on the bottom of the window. This

Editing a Profile

Editing a profile works in a similar fashion to adding a profile.
1. Select the profile you wish to edit from the list.
2. Click on Edit, the Configuration Profile window will pop up.
3. Navigate to the sections on the tree menu that need to be modified.
4. Once the profile is complete, click on the Save Profile button on the bottom of the window
Polycom ReadiManager LX100 User Guide
items on that page will overwrite information in the current identical fields in the endpoint's settings. For
example, as in the screenshot above, "Auto Answer" is configured to Yes and "Allow User Setup" to No. If
the "Allow User Setup" is currently set to Yes on the ViewStation, after provisioning "Allow User Setup" will
change from Yes to No and "Auto Answer" will have a Yes value.
NOTE
If a field is left blank on any of the pages which have "Enable this for provisioning" then the equivalent field on the
endpoint will be erased when provisioned.
NOTE
The Add Profile feature saves the settings when navigating from one section to the next. However, these settings
are only temporarily saved. In order for the settings to be permanently saved, the Save Profile button on the
bottom of the window must be clicked on.
saves all pages within the Admin Setup directory, not just the page shown in the example screenshot.
NOTE
The endpoint cannot be configured beyond the model capabilities. Even though it seems that you are able to
provision a settings which your endpoint model may not inherently have, these configuration pages are not model
specific.
Chapter 5 Provisioning 62