New Addresses - Polycom ReadiManagerLX100 Management Manual

Modifying Addresses in the Global Directory
As the administrator, there are three functions that are allowed in modifying Global Directory entries:

New Addresses

Creating a dynamic entry
In order for Polycom video endpoints to register with the Global Directory you must configure the video endpoint to
report to this Global Directory server. Once the video endpoints are configured, the endpoints should register with the
Global Directory after being powered off and then back on.
Creating a static entry
Unlike dynamic Global Directory registration, the information entered here is "static". If changes are made to the
system such as the acquisition of a new ISDN number or IP address, the user must edit the information using the "Edit
Address" function otherwise the information in the Global Directory will be outdated.
1. Click on the New Address button. A pop up screen will appear with entry fields requiring Name and Protocol.
2. Choose the type of entry by marking either the IP or ISDN checkbox.
3. Fill out the Name.
4. Fill out the appropriate information. The following page provides more information on the items displayed in
5. Once the appropriate information is filled out, click on OK.
Polycom ReadiManager LX100 User Guide
New Address
Edit a static address
Edit a dynamic address
Delete Address
the New Address window.
Creates a static entry in the Global Directory
Edit the contact information
Change the list and view settings for the video endpoint entry
Deletes an entry
Chapter 3 Global Directory 26