Polycom ReadiManagerLX100 Management Manual page 162

Appendix
V-Series Admin Setup Menu
System Info :: Admin Setup ::
Dialing Rules
V-Series Field
Number of Digits in
Extension
International Dialing Prefix
Public Network Access
Public Network Dialing
Prefix
Public Network (same area
code) Prefix
Private Network Access
Public Network (same area
code) Prefix
If Area Code =
Dial Prefix
Always dial area code
Dial 1+ for all USA calls
Polycom ReadiManager LX100 User Guide
Global Services
Type Meaning
User Defined Value Sets the number of digits in the dialing extension. Usually
applies to systems that are on a PBX.
User Defined Value Prefix required to place international calls. This prefix is
automatically appended to any international calls made from
the Global Directory. This overrides the international dialing
prefix that is normally set in the V-Series Country Setup screen.
Drop Down Menu Enables this system to dial calls outside of your private network
User Defined Value Dialing prefix as required by the PBX to dial out to the public
network. This prefix is automatically inserted before the dialing
numbers to the public network from the Global Directory.
User Defined Value Dialing prefix required by your PBX to dial out to the public
network. This prefix is automatically inserted before the dialing
numbers to the public network in the Global Directory.
Drop Down Menu Enables this system to use a private network for calls
User Defined Value Dialing prefix that is used to access an organization from
outside the private network
User Defined Value Area code for configuration
User Defined Value Set prefixes dialed before the area code
Checkbox option Checked - User will need the area code to dial sites that have
the same local area code as the V-Series.
Checkbox Option Enable this option if you must dial a "1" before the area code.
Appendix 155