Polycom ReadiManagerLX100 Management Manual page 153

Appendix
V-Series Admin Setup Menu
System Info :: Admin Setup :: Video Network ::
Firewall
V-Series Field
Fixed Ports
Fixed TCP ports lower limit
Fixed TCP ports upper limit
Fixed UDP ports lower limit
Fixed UDP ports upper limit
NAT Configuration
NAT Public Address
Address Displayed in Global
Directory
NAT is H.323 Compatible
Polycom ReadiManager LX100 User Guide
IP Network
Type Meaning
Checkbox option Checked: Enables the use of fixed ports on this system.
User Defined Field Specifies lower limit for TCP fixed ports used by this system.
User Defined Field Specifies higher limit for TCP fixed ports used by this system.
User Defined Field Specifies lower limit for UDP fixed ports used by this system.
User Defined Field Specifies higher limit for UDP fixed ports used by this system.
Pull Down Menu Specifies whether the system should determine the NAT Public
WAN Address automatically.
• If the system is behind a NAT that allows HTTP traffic,
select Auto.
• If the system is behind a NAT that does not allow HTTP
traffic, select Manual.
• If the system is connected to the IP network through a
Virtual Private Network (VPN), select Off.
Checkbox Checked - Displays the address that callers from outside the
LAN use to call your system.
Checkbox Checked - Displays this system's address in the public or
private Global Directory.
Checkbox Checked - Specifies that the NAT is H.323 compatible.
Appendix 146