Getting Started With Polycom Realpresence Group Series; Realpresence Group System Power; Power On The System - Polycom RealPresence Group Series Documentation

Getting Started with Polycom
RealPresence Group Series
This user guide is intended for beginner users, as well as intermediate and advanced users who want
to learn about video conferencing and the Polycom® RealPresence® Group Series system .
For detailed information on the available systems and bundles, as well as the most recent feature
descriptions, refer to the Polycom RealPresence Group Series Release Notes available at
support.polycom.com.
Note Your system administrator can configure RealPresence Group Series systems and
RealPresence Touch devices to show only those options used in your organization.
Therefore, this guide might cover options that you cannot access on your system. Check
with your system administrator to find out more about the options set for your system.

RealPresence Group System Power

RealPresence Group Series systems have a power proximity sensor instead of a physical power
button. Instead of pressing an actual button that moves to power on the system, you can touch the
proximity sensor , or touch near it, on the front of the system.
Related Topics

Getting Started with Polycom RealPresence Group Series

Power On the System

Before powering on your system, make sure you connect any essential wired devices or accessories to
the system first. After you have connected the related equipment, power on the system.
Procedure
•
Do one of the following:
◦
On RealPresence Group 300, 310, 500, and 700 systems, touch and hold the
sensor on the front of the system. Because the power sensor is touch sensitive, you can
place your finger on or close to the sensor.
◦
Press and hold
When the system is powered on successfully, the LED on the front panel turns blue and the
Polycom splash screen displays.
Printed from Polycom, Inc. (http://documents.polycom.com)
on the remote control.
power
Page 8