Binary; Bye - H3C S5830V2 Command Reference Manual

Related commands

binary

binary
Use binary to set the file transfer mode to binary, which is also called the flow mode.
Syntax
binary
Default
The file transfer mode is binary.
Views
FTP client view
Predefined user roles
network-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
The carriage return characters vary by operating system. For example, HP and Windows use /r/n,
and Linux uses /n. To transfer files between two systems that use different carriage return
characters, determine FTP transfer mode according to the file type.
FTP transfers files in either of the following modes:
•
Binary mode—Transfers program file or pictures. This mode is also called flow mode.
•
ASCII mode—Transfers text files.
Examples
# Set the file transfer mode to binary.
ftp> binary
200 TYPE is now 8-bit binary
Related commands
ascii

bye

Use bye to terminate the connection to the FTP server and return to user view.
If no connection is established between the device and the FTP server, use this command to return
to user view.
Syntax
bye
Views
FTP client view
Predefined user roles
network-admin
Examples
# Terminate the connection to the FTP server and return to user view.
79