HPE ProLiant ML350 Gen11 User Manual page 80

Install the cable management arm Install the cable management arm
About this task About this task
The cable management arm (CMA) allows the server to be fully extended from the rack without the need to power off the system or
disconnect any rear panel cables. This CMA is designed for ambidextrous implementation.
For the purpose this procedure, left and right terminology is from the perspective of a user facing the front of the rack.
CAUTION: CAUTION:
Support the CMA during the removal and replacement procedures. Do not allow the CMA to hang by its own weight
during the procedure.
Procedure Procedure
1. Connect and secure all peripheral cables and power cords to the rear panel.
2. (Optional) The CMA retention bracket can be rotated to fit a left- or right-hand CMA operation. Press and hold the rotate
mechanism (callout 1), and then rotate the bracket 180° (callout 2).
There will be an audible click to indicate that the bracket is locked in its adjusted position.
HPE ProLiant ML350 Gen11 Server User Guide 80