Advertisement
Item
Item
LED
LED
1
Fault/Locate
2
Online/Activity
Setup
Setup
This chapter describes general operational requirements and safety reminders, as well the initial setup procedure for the server.
Subtopics
Subtopics
Operational requirements
Operational requirements
Rack warnings and cautions
Rack warnings and cautions
Server warnings and cautions
Server warnings and cautions
Electrostatic discharge
Electrostatic discharge
Initial system installation
Initial system installation
Removing the shipping brackets
Removing the shipping brackets
Operational requirements
Operational requirements
When preparing the site and planning the installation for the HPE ProLiant ML350 Gen11 Server, be sure to observe the following
general operational requirements:
Space and airflow requirements
Temperature requirements
Power requirements
Electrical grounding requirements
For server-specific environmental requirements, see Environmental specifications.
Subtopics
Subtopics
Space and airflow requirements
Space and airflow requirements
Temperature requirements
Temperature requirements
Status
Status
Definition
Definition
Solid amber
Solid blue
Flashing amber/blue (1
flash per second)
Flashing amber (1 flash
per second)
Off
Solid green
Flashing green (1 flash per
second)
Flashing green (4 flashes
per second)
Off
Drive has failed, unsupported, or invalid.
Drive is operating normally and being identified by a management
application.
Drive has failed, or a predictive failure alert is received for the drive. The
drive has also been identified by a management application.
Drive predictive failure alert is received. Replace the drive as soon as
possible.
Drive is operating normally and is not identified by a management
application.
Drive is online and has no activity.
Drive is doing one of the following:
Rebuilding or performing a RAID
Erasing
Drive is operating normally and has activity.
Drive is not configured by a RAID controller or is a spare drive.
HPE ProLiant ML350 Gen11 Server User Guide
36
Advertisement
