Advertisement
9. Connect the serial port cable to the system board .
10. Install the secondary riser cage.
11. Install the access panel
12. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
13. Connect all peripheral cables to the server.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
Configuring the serial port
Configuring the serial port
17. To configure the serial port setting:
a. From the boot screen, press F9 F9 to access the UEFI System Utilities.
b. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Serial
Port Options > Embedded Serial Port.
c. Select a setting.
d. Press F12
F12 key to save your selection.
e. Click Yes-Save Changes.
f. Click Reboot.
Results
Results
The installation is complete.
Internal USB device options
Internal USB device options
The server has one internal USB 2.0 port and one USB 3.2 Gen 1 port . Use these ports to install internal USB devices such as:
USB flash media devices for booting up from flash solutions or for data backup/redundancy.
HPE ProLiant ML350 Gen11 Server User Guide
145
Advertisement
