HPE ProLiant ML350 Gen11 User Manual page 143

7. Install the access panel
8. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
9. Connect all peripheral cables to the server.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server.
Results Results
The installation is complete.
Serial port option Serial port option
Install the serial port option to enable communication to physical serial devices. You can also use the serial connection to remotely
access the system BIOS and view POST error messages.
Subtopics Subtopics
Installing the serial port Installing the serial port
Installing the serial port Installing the serial port
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a hex screwdriver available.
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
HPE ProLiant ML350 Gen11 Server User Guide 143