HPE ProLiant ML350 Gen11 User Manual page 138

13. Connect the boot device signal and power cables to the system board .
14. To allow hot-plug access to the SSDs on the boot device, remove the security cover.
15. Install the access panel
16. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
17. Connect all peripheral cables to the server.
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server.
Results Results
HPE ProLiant ML350 Gen11 Server User Guide 138