Advertisement
7. Remove the tertiary riser from the 2 x16 slots riser cage.
8. If the secondary riser cage is not preinstalled, install the secondary riser cage.
9. Install the tertiary riser on the secondary riser cage.
10. Cable the tertiary riser:
If installing the RDX docking station, connect the RDX power cable .
If installing the expansion card, connect the signal cables.
11. (Optional) Install the expansion card .
12. Install the access panel
13. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
HPE ProLiant ML350 Gen11 Server User Guide
109
Advertisement
