HPE ProLiant ML350 Gen11 User Manual page 59

4. If removed, reinstall the fan blank into bay 1.
5. Perform the post-installation or maintenance steps required by the procedure that necessitates the removal of the fan cage.
Install the access panel Install the access panel
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. With the access panel latch open, insert the guide pin on the chassis through the hole on the bottom side of the latch.
2. Close the access panel latch.
The access panel slides to the closed position.
HPE ProLiant ML350 Gen11 Server User Guide 59